Ping screen – Symbol Technologies SPT 1700 User Manual
Page 73
2-23
Network Setup
Ping Screen
From this screen you can send a PING request to another network device whose network
address you already know. This is useful to verify network connectivity.
As with other PING applications, you must enter the IP address of the other network device
in the IP field and then select the desired payload size. Pressing the Send button will send
the PING. A status line will provide information on whether or not the PING was successful
by displaying a "Success" or "Fail" message. There is a 20 second timeout for a response
before a "Success" or "Fail" message may display.
Please note that there are some limitations on this PING implementation:
•
The size of PING payload is limited to 99 bytes. If a payload of greater than that is
entered, a data error message will be displayed.
•
The delay to wait for response is fixed at 20 seconds.
After you have viewed this information, press the OK button to return to the Quick Status
screen.