Conducting a local hotsync operation, Selecting hotsync setup options – Symbol Technologies SPT 1700 User Manual
Page 181
9-9
Applications: HotSync®
Conducting a Local HotSync Operation
After you complete the first HotSync operation, the HotSync process is even faster and
easier!
To conduct a local HotSync operation:
1.
Insert the SPT 1700 terminal in the cradle, or connect the synchronization/charging
cable.
2.
Start the HotSync Manager.
3.
Press the
button on the front of the CRD1700-1000S cradle to start the
HotSync process. If you are using the synchronization/charging cable or the CRD
1700-4000S cradle, tap the
icon on the terminal’s application screen.
Synchronization begins immediately.
4.
Wait for the Symbol Palm Terminal Desktop to display a message indicating that
the process is complete.
Selecting HotSync Setup Options
You can choose when you want HotSync Manager to run, and adjust the local, modem, and
network HotSync settings.
To set the HotSync Options:
1.
Click the
icon in the Windows System Tray to open the HotSync Manager menu
and click Setup. The Setup dialog displays with the General tab open:
.