Configuring the spectrum24 network (spt 174x only), Configuring the wide area network (spt 173x only) – Symbol Technologies SPT 1700 User Manual
Page 44
1-20
SPT 1700 Series Product Reference Guide
3.
Tap a month box to select the current month.
4.
Tap the current date to close the Set Date screen and return to the General
Preferences screen.
Note: You do not need to adjust the other General Preference settings at
this time. Refer to
on page 14-10 for
information about the remaining options.
Configuring the Spectrum24 Network (SPT 174x only)
Before the SPT 174x can be used on the Spectrum24 wireless LAN, your facility must be
set up with the equipment required to run the wireless LAN and your terminal must be
properly configured. Refer to
for instructions on configuring your
terminal for use with Spectrum24.
Configuring the Wide Area Network (SPT 173x only)
Before the SPT 173X can be used on a WAN (CDPD or GSM), your terminal must be
properly configured. Refer to
for instructions on configuring your
terminal for use with a WAN.
Tap arrows to select year
Tap to select month
Tap to select date