Symbol Technologies SPT 1700 - Manual (Page 287)

14-21
Applications: Preferences
To select a connection type:
1. Tap the service you want to use in the Network Preferences screen.
2. Tap the Details button to open the Details screen.
3. Tap the Connection type pick list and select one of the following connection types:
Note: If you are not sure, try PPP; if that doesn’t work, ask your Internet
Service Provider or your System Administrator for the correct
connection type.
Idle Timeout
The Idle Timeout setting defines how long your SPT 1700 terminal waits before dropping
the connection with your ISP or dial-in server when you switch out of a TCP/IP application.
To set the Idle Timeout:
1. Tap the Idle Timeout pick list and select one of the following options:
PPP Point-to-Point protocol
SLIP Serial Line Internet Protocol
CSLIP Compressed Serial Line Internet Protocol
Immediate Your SPT 1700 terminal drops the connection to your ISP
immediately when you switch to another application.
1 minute Your SPT 1700 terminal waits one minute for you to open
another application before it drops the connection.
Select connection type