Socket Mobile Digital Phone Card for Data-Capable Mobile Phone - Manual (Page 15)

CHAPTER 3: WINDOWS CE SETUP | 13
! IF YOUR DEFAULT WEB BROWSER IS NETSCAPE, DO NOT run
the SETUP.HTM file on Netscape, because it will not work properly.
Instead, choose either of two options:
OPTION ONE: Use Internet Explorer to run the SETUP.HTM file.
(a) In the Internet Explorer screen, click File | Open.
(b) In the Open screen, type X:\SETUP.HTM
(Replace X with your CD drive letter.)
Open screen from Internet Explorer 5.5
(c) Proceed with the instructions described on the previous page for
Internet Explorer.
OPTION TWO: Run the SETUP.EXE file.
Click on My Computer or use Windows Explorer to manually browse
the CD to the WinCE folder and manually launch the SETUP.EXE file
found there.
Important! Be sure to choose the SETUP.EXE file, NOT the
SETUP.HTM file. The two file types have different icons:
EXE icon HTM icon for Netscape
5. Follow the instructions on the host PC screen until setup is done.
Note: After completing setup, your host PC may display an
Application Downloading Complete screen. Click OK.
6. Disconnect the mobile computer from the host computer. Soft reset the
mobile computer. Push the reset button, often on the back of the mobile
computer.
Important! Be sure to soft reset your mobile computer after software
installation! Push the reset button, which may be on the back of your
mobile computer!