Socket Mobile Digital Phone Card for Data-Capable Mobile Phone - Manual (Page 43)

CHAPTER 6: WINDOWS 2000/XP SETUP | 41
b. Windows XP —
• Network Connection Type: Select Connect to the Internet
• Getting Ready: Select Set up my connection manually
Getting Ready screen
• Internet Connection: Select Connect using a dial-up modem
Internet Connection screen
• Select a Device: Select the standard 19200 bps modem in the
COM port where you inserted the DPC.
4. After completing the wizard, in most cases, your connection is now
ready, and you are ready to dial. However, if you have special TCP/IP
settings to enter, you still need to configure your connection for these
settings.
5. To configure your connection for TCP/IP settings, follow the directions
on the next page.