Socket Mobile Digital Phone Card for Data-Capable Mobile Phone - Manual (Page 9)

CHAPTER 1: INTRODUCTION | 7
Setup for Windows 9x/Me/2000/XP
STEP 1: Register your card.
STEP 2: Activate data services for your mobile phone.
STEP 3: Complete the Network Information Form.
STEP 4: Uninstall old Socket DPC software.
STEP 5: Insert the installation CD.
STEP 6: Insert the card and attach the phone.
STEP 7: Install the software.
STEP 8: Set up new modem.
STEP 9: Set up remote networking.
STEP 10: Dial and connect!
Setup for Mac OS
STEP 1: Register your card.
STEP 2: Activate data services for your mobile phone.
STEP 3: Complete the Network Information Form.
STEP 4: Insert the card and attach the phone.
STEP 5: Insert the installation CD and launch the Installer.
STEP 6: Set up new modem.
STEP 7: Set up remote networking.
STEP 8: Dial and connect!