Socket Mobile Digital Phone Card for Data-Capable Mobile Phone - Manual (Page 25)

CHAPTER 3: WINDOWS CE SETUP | 23
Making a Data Call for Palm-size and Handheld PC Devices
This section primarily shows Handheld PC screens. Palm-size PCs and pen
tablets will have functionally equivalent screens. Any significant differences
will be noted.
Placing a Data Call
1. Go to Start | Programs | Communication. On some mobile computers, you
may also need to click on Remote Networking.
2. Tap on the icon for your wireless DPC connection.
3. In the next screen, enter your User name and Password.
Connection settings screen
4. (Optional) For convenience, you can check the Save password box, but
your password will be saved only after you start the connection.
5. For some mobile computers, you must modify the dial properties so the
mobile computer can dial properly. For instructions, refer to the mobile
computer’s user manual.
6. Tap Connect. When your mobile computer starts calling, you should see
the call status on both the mobile computer screen and phone display.
Connection status screen
7. When a screen reports that you have Connected, a connection icon
will also appear in your mobile computer’s task tray.
Connection status screen