Socket Mobile Digital Phone Card for Data-Capable Mobile Phone - Manual (Page 28)

26 | CHAPTER 4: CASIO BE-300 SETUP
STEP 5: Set up Remote Networking
You will need your completed Network Information Form for this step.
1. Go to Main | Connections. Tap on New Setting.
2. In the next screen, enter a Connection name, such as “Socket DPC.”
Make sure Dial-up is selected, then tap !
3. In the next screen, enter your Phone number, Connection ID (this is the
same as your user name), and Password. Tap on Advanced Settings.
4. Tap !. In the next screen, follow your Network Information Form to
enter the proper settings for your network. When done, tap OK.
• If your network supports DHCP, check Auto detect.
• If your network does NOT support DHCP, uncheck Auto detect and
enter any necessary IP addresses.
5. When you return to the dial-up information screen, tap !
6. In the next screen, make the following selections:
• Modem: Select the Socket DPC.
• Speed: 19200 bps
• Wait for tone: unchecked
7. If needed, tap through the subsequent screens to enter any other network
settings. When done, tap Finish.
8. A message may appear, reporting that the settings will take effect the
next time you insert the card. Tap ok.