Socket Mobile Digital Phone Card for Data-Capable Mobile Phone - Manual (Page 47)

CHAPTER 7: MAC OS SETUP | 45
Chapter 7 Mac OS Setup
This chapter explains Steps 4-8 for Apple
PowerBooks. Before starting Steps 4-8, be
sure to complete Steps 1-3, covered in
Chapter 2: Preliminary Setup.
For more information on configuring your
PowerBook, refer to your PowerBook user
manual or visit Apple's support website at:
www.apple.com/support/ .
STEP 4: Insert the Card and Attach the Phone
1. Plug the DPC into the PC Card adapter, with the purple label on top.
Do NOT insert the DPC upside down, or damage may occur.
2. With the notebook computer turned ON, insert the combined unit into
the PC Card slot. A card icon will appear on the desktop.
3. After the card icon appears, connect the free end of the data cable to the
data part of the mobile phone. The data port is typically on the bottom or
side of the mobile phone and usually is the same port used to charge the
phone.
Insert the DPC
into the adapter
with the card’s
colorful label
on top.