Socket Mobile Digital Phone Card for Data-Capable Mobile Phone - Manual (Page 38)

36 | CHAPTER 6: WINDOWS 2000/XP SETUP
Chapter 6 Windows 2000/XP Setup
This chapter explains Steps 5-10 for Windows 2000/XP notebooks. Before
starting Steps 5-10, be sure to complete Steps 1-4, covered in Chapter 2:
Preliminary Setup. This chapter primarily shows Windows XP screens.
Windows 2000 will have functionally equivalent screens. Any significant
differences will be noted.
STEP 5: Insert the Installation CD
Insert the installation CD into the CD drive of your notebook computer.
STEP 6: Insert the Card and Attach the Phone
1. Plug the DPC into the PC Card adapter, with the purple label on top.
Do NOT insert the DPC upside down, or damage may occur.
2. With the notebook computer turned ON, insert the combined unit into
the PC Card slot. Windows notebooks in most cases will signal that the
DPC has been properly inserted via a beep, task tray icon and/or
message screen.
3. Connect the free end of the data cable to the data part of the mobile
phone. The data port is typically on the bottom or side of the mobile
phone and usually is the same port used to charge the phone.
Insert the DPC
into the adapter
with the card’s
colorful label
on top.