Socket Mobile Digital Phone Card for Data-Capable Mobile Phone - Manual (Page 37)

CHAPTER 5: WINDOWS 9x/Me SETUP | 35
Placing a Data Call
1. In Dial-Up Networking, double-click your wireless connection:
2. A Connect To screen will appear. Enter your User Name and Password.
Verify the phone number and your location. Click Connect.
Connect To screen
Note: If you check
Save password, the information will be saved only
after you click Connect.
3. When the computer starts calling, the connection status should appear on
both the computer screen and phone display.
4. When the connection status window reports that you have successfully
connected, a Dial-up icon will appear in the task tray.
Ending a Data Call
1. Double-click on the Dial-up icon in the task tray, shown above.
2. The connection status screen appears. Click Disconnect. The Dial-up icon
will disappear from your taskbar, and your mobile phone will hang up.
Connection status screen