Kane Industries C6713CPU - Manual (Page 43)

H ARDWARE R EFERENCE G UIDE
MICRO - LINE
®
C6713CPU
Date : 28 November 2005
Doc. no. : C6713CPU_HRG
Iss./Rev : 1.1
Page : 43
Pins E30 and E31:
These signals are routed to the FPGA. Usage of these signals requires either an ORSYS board
support package or a custom FPGA design. These signals are pulled-up by the FPGA as long as
the FPGA is not loaded and have 22R series resistors.
Signal GND:
This is one further signal ground pin of the micro-line
® connector.