Kane Industries C6713CPU - Manual (Page 49)

H ARDWARE R EFERENCE G UIDE
MICRO - LINE
®
C6713CPU
Date : 28 November 2005
Doc. no. : C6713CPU_HRG
Iss./Rev : 1.1
Page : 49
7.4 Supply Voltage
The C6713CPU must be supplied with a voltage of nominal +3.3 V. The integrated switching
voltage regulators generate all necessary on-board voltages.
CAUTION:
The C6713CPU is not protected against reversed voltage. Please be careful when connecting
power supply to the board. Applying reversed voltage will damage the board.
CAUTION:
The power up voltage ramp time must be at least 0.6 ms. The ramp time is measured from 10% to
90% of the full nominal voltage swing. Direct plugging a 3.3V power cable into a working 3.3V
power supply may damage the board.
Board type
minimum allowed supply voltage maximum allowed supply voltage
C6713CPU 3.25 V 3.35 V
Table 18: Voltage limits for the C6713CPU
7.5 Power Consumption
The typical power consumption is shown in the following table. Please note that the power
consumption strongly depends on I/O pin usage and the FPGA design.
Condition Typical power consumption
Toggle_led_1 example, any board, FPGA loaded 460 mA
Toggle_led_fpga example, any board, FPGA loaded 470 mA
Table 19: Power consumption of the C6713CPU
7.6 Reset Timing
Parameter Min Typ Max
/RESETIN pulse width 1 µs
(/)RESETOUT pulse width 140ms 200ms 280ms
Watchdog timeout 1.6s
Table 20: Reset timing
7.7 Ambient Temperature
Storage temperature: -25..+85° C
Operating temperature: 0..+70° C
Extended temperature versions are available on request
7.8 Ambient Humidity
Storage with up to 90% humidity, non condensing
Operating with up to 85% humidity, non condensing