Logicube Omniclone Xi - Manual (Page 10)

INTRODUCTION
4 Logicube Omniclone Xi ™ User’s Manual
•
For the OCXi™ and OCX5i™: An AC power
cord.
•
For the OCX2i™: An external 12VDC – 5.5A
power supply.
•
A light bar that mounts on the back of the unit.
NOTE: The OCX2i™ does not come with a
light bar, though one can be purchased
separately.
•
A bootable CD-ROM containing:
A. A backup copy of the software that is
already pre-installed on the Logicube
Omniclone Xi™.
B. Software update utilities necessary to load
the software on the unit.
C. Windows 98/ME drivers for connecting
through the USB port.
D. An electronic copy of this manual.
•
A 64MB Compact Flash (CF) Memory Card.
This Card is inserted into the slot in the back of
the unit.
NOTE: It is highly recommended that the CF
Card be left inside the Omniclone-Xi for optimal
performance.
•
This manual.
NOTE: Please contact Logicube Technical Support
at (818) 700-8488 X3 if any of the above pieces are
missing.