Logicube Omniclone Xi - Manual (Page 40)

THE DATABASE/BARCODE OPTION
34 Logicube Omniclone Xi ™ User’s Manual
Scan2- UserEnteredName2 – This is the second
line of data collected by the Barcode Scanner (i.e.
Batch Number). The entered name needs to be 18
characters or less.
Scan3- UserEnteredName3 – This is the third line
of information collected by the Barcode Scanner
(i.e. Location Number). The entered name needs to
be 18 characters or less.
Time – This records the time that the cloning
session completed. The time comes from the
Omniclone-Xi’s own internal clock.
Date – This records the date from the unit’s internal
clock.
NOTE: Please refer to “Time/Date Settings” in
Chapter 3: Cloning Modes for more information
on how to set the internal clock.
MasterModel – This line records the Model
Number of the Master drive.
MasterSerial – This line records the Serial Number
of the Master Drive.
TargetModels – This line records the Model
Number of each Target drive connected to the
Omniclone-Xi.
TargetSerials - This line records the Serial Number
of each Target drive connected to the Omniclone-
Xi.
Mode – This line records the Cloning Mode used
(i.e. Clever, Mirror, etc.)
Outcome – This records whether or not the cloning
session was completed successfully. It will either
say PASS or FAIL.
Database.csv
The Logicube DataBase™ option writes all of the
collected information to a file named Database.csv.
The “csv” extension stands for “comma separated
values” and is a common database format. It can
be read by most database programs (i.e. Microsoft
Excel, Microsoft Access, dBase, etc.). This file is
stored on the Compact Flash (CF) drive.
A typical .CSV file opened in a text editor looks
something like this:
TEST, Date, MasterModel, TargetModels-1, TargetModels-2, TargetModels-3,
TargetModels-4, TargetModels-5, TargetModels-6, TargetModels-7,
TargetModels-8, TargetModels-9, TargetModels-10, Mode, Outcome, 5/18/05,
WDC WD400BB-22HEA1, ST380023AS, NA, NA, NA, NA, NA, NA, NA, NA, NA,
Mirror, SUCCESS