Lanier AP3200 - Manual (Page 113)

Job Control Menu
99
6
Job Control Menu
There are six menus under the “Job Control” menu.
• Paper Input
• Duplex
• Output Tray
• Print Quality
• System
• PCL Menu
Job Control Parameters
❖ ❖ ❖ ❖ Paper Input 1 /
3
Menu Description
Tray Priority You can select the default tray. The tray selected with the printer
driver overrides the one selected here. In DOS printing, the tray
selected here is used when no tray is selected for a print job.
Tray 1, Tray 2, Tray 3, Tray 4
Note
❒ Default: Tray 1
❒ Only the installed trays appear on the panel display.
❒ It is recommended that you load paper having the size and di-
rection you frequently use in the tray selected with "Tray Pri-
ority".
Tray Locking If you use several different kinds of paper, you can lock a tray to
prevent printing on wrong paper. If you want to select a locked
tray, select the paper tray using the printer driver.
None, Tray 1, Tray 2, Tray 3, Tray 4
Note
❒ Default: None
❒ Only the installed trays appear on the panel display.
❒ You cannot lock multiple trays at once.
❒ When a locked tray is selected using the printer driver, the
printer does not search for any other tray.