Lanier AP3200 - Manual (Page 64)

Troubleshooting
50
4
Error 40724 Tray 3 cannot be used. Press {Job Reset}. Contact
your sales or service represen-
tative.
Error 40725 Tray 4 cannot be used. Press {Job Reset}. Contact
your sales or service represen-
tative.
Error 40740 The staple tray of the finisher
cannot be used. Press {Job Reset}. Contact
your sales or service represen-
tative.
Error 40744 The finisher cannot be used. Press {Job Reset}. Contact
your sales or service represen-
tative.
Form Feed... Doing form feed. Wait for a while.
Load Bypass xx The bypass tray is out of pa-
per.
xx : Paper Size
Load paper of the indicated
paper size into the bypass
tray.
The paper size specified with
the printer driver differs from
the paper size specified with
the operation panel. A Press {Form Feed}.
If there is paper in the bypass
tray, the printer starts print-
ing.
If there is no paper in the by-
pass tray, the following mes-
sage appears on the panel
display. In this case, go to next
step.
Form Feed
Tray 1
B Press {T T T T} or {U U U U} to select
the paper tray and then press
{Enter #}.
The printer starts printing.
Load Tray # xx There is no paper in the indi-
cated tray.
# : Tray Number
xx : Paper Size
Load paper of the indicated
paper size into the indicated
paper tray.
Load *** xx There is no paper size of the
indicated paper type.
***: Paper Type (plain, special,
recycled)
XX: Paper Size
Load paper of the indicated
paper size and paper type into
the tray.
Messages Description Comments