Lanier AP3200 - Manual (Page 116)

Using the Operation Panel
102
6
❖ ❖ ❖ ❖ Print Quality
Menu Description
Edge Smoothing You can select whether the Edge Smoothing feature is enabled.
• On
• Off
Note
❒ Default: On
❒ If "Edge Smoothing" is "On", "Toner Saving" is ignored even if
it is "On".
Resolution You can select the print resolution in dots per inch.
• 600 dpi (PCL 5e, PCL 6, PS, TIFF)
• 400 dpi (TIFF)
• 300 dpi (PCL 5e, PS, TIFF)
• 200 dpi (TIFF)
Note
❒ Default: 600 dpi
❒ The resolution selected with the printer driver overrides the
one selected here.
Image Density You can select the print image density.
Lighter +3, Lighter +2, Lighter +1, Normal, Darker +1, Darker +2,
Darker +3
Note
❒ Default: Normal
❒ When you want a darker image under high volume printing
conditions, we highly recommend you to select Darker+3
from the operation panel to better maintain image density.
Toner Saving You can select whether or not the Toner Saving feature is enabled.
• Off
• On
Note
❒ Default: Off
❒ If "Edge Smoothing" is "On", "Toner Saving" is ignored even if
it is "On".