Lanier AP3200 User Manual
Page 56
Troubleshooting
42
4
Energy Saver 2
In Energy Saver 2 mode.
Press an operation panel key
or send a job from the comput-
er to wake the printer up.
Error 1
An error with the optional
RAM has occurred.
Turn the printer power off and
on. If the message appears
again, contact your sales or
service representative.
Error 2
An error with the parallel in-
terface board has occurred.
Turn the printer power off and
on. If the message appears
again, contact your sales or
service representative.
Error 3
An error with the NV-RAM
has occurred.
Turn the printer power off and
on. If the message appears
again, contact your sales or
service representative.
Error 5
An error with the HDD has oc-
curred.
Install the HDD again. If the
message appears again, con-
tact your sales or service rep-
resentative.
Error 6
An error with the Resident
font ROM has occurred.
Turn the printer power off and
on. If the message appears
again, contact your sales or
service representative.
Error 7
An error with the ASIC has oc-
curred.
Turn the printer power off and
on. If the message appears
again, contact your sales or
service representative.
Error 15
An error with the Clock Gen-
erator has occurred.
Turn the printer power off and
on. If the message appears
again, contact your sales or
service representative.
Error 30711
AD380 (duplex unit) cannot be
used.
Use another tray to print. Con-
tact your sales or service rep-
resentative.
Error 30721
PS420 (paper feed unit) cannot
be used.
Use another tray to print. Con-
tact your sales or service rep-
resentative.
Error 30722
Tray 1 cannot be used.
Use another tray to print. Con-
tact your sales or service rep-
resentative.
Error 30723
Tray 2 cannot be used.
Use another tray to print. Con-
tact your sales or service rep-
resentative.
Messages
Description
Comments