Lanier AP3200 - Manual (Page 97)

Cleaning the Pad inside of the Tray
83
4
Cleaning the Pad inside of the Tray
If the pad inside of the tray is dirty ,
multiple feeds might occur when the
tray is nearly empty. In this case,
clean the pad inside of the each tray.
Follow these steps to clean the pad in-
side of standard tray 2.
A
Slide tray 2 out until it stops.
B
When there is paper in the tray,
remove paper.
C
Wipe the pad inside of the tray
with a dry cloth.
Important
❒ Do not wipe with a wet cloth, al-
cohol or cleanser.
D
Load paper and slide tray 2 slowly
until it stops.
E
Clean the pad inside of tray 1 in
the same way.
F
If PS440 (paper feed unit) is in-
stalled, clean the pad inside of
tray 3 or tray 4 in the same way.
ZAEY012E
ZAEY035E