Lanier AP3200 - Manual (Page 120)

Using the Operation Panel
106
6
Network Setup Menu
Reference
For more information about “Network Setup”, see “Configuring the Printer
for the Network” in the Setup Guide.
❖ ❖ ❖ ❖ Network Setup 1 /
2
Menu Description
IP Address You can specify the printer's IP Address.
Note
❒ Default: 011.022.033.044
Subnet Mask You can specify the Subnet Mask.
Note
❒ Default: All zero
Gateway Address You can specify the Gateway Address.
Note
❒ Default: All zero
Access Control You can specify the Access Control Address.
Note
❒ Default: All zero
Access Mask You can specify the Access Control Mask.
Note
❒ Default: All zero
Network Boot You can select how TCP/IP settings are acquired.
None, RARP + TFTP, BOOTP, RARP & BOOTP, DHCP, ARP +
PING, ARP & RARP, ARP & BOOTP, ARP&RARP&BOOTP
Note
❒ Default: None