Lanier AP3200 - Manual (Page 95)

Cleaning the Paper Feed Roller
81
4
F
Insert the projection of the paper
feed roller into the hole (
A A A A).
While pulling the roller, insert
the roller into the rear shaft (
B B B B).
G
Check the motion of the paper
feed roller to confirm that it is
properly set.
H
Return the green lever to its origi-
nal position.
I
Clean the paper feed rollers of
tray 2, following the steps
BBBB to GGGG.
J
Hold tray 2 (with a lever on the
paper size dial) with both hands,
and slide it slowly into the second
from the top until it stops.
K
Hold tray 1 with both hands, and
slide it slowly until it stops.
L
If PS440 (paper feed unit) is in-
stalled, clean the paper feed roll-
ers of tray 3 or tray 4 in the same
way.
ZAEM110E
ZAEM101E
ZAEM091E
ZAEM141E