Lanier AP3200 - Manual (Page 60)

Troubleshooting
46
4
Remove Paper
from Duplex Unit
There is still paper in AD380
(duplex unit). Remove paper from AD380
(duplex unit).
Remove Paper
from Staple Tray
There is paper in the stack unit
of the finisher. Remove paper from the stack
unit of the finisher.
Important
❒ Remove the paper from the
output tray before it be-
comes full. If you leave pa-
per in the output tray, it
can cause a paper misfeed.
Remove Paper
Mailbox Tray #
The CS370 (mailbox) tray # is
full.
# : Tray Number
Remove paper from the CS370
(mailbox) tray.
Important
❒ Remove the paper from
output tray before it be-
comes full. If you leave pa-
per in the output tray, it
can cause a paper misfeed.
Remove Paper
Shift Tray
The shift tray of the finisher is
full. Remove paper from the finish-
er tray.
Important
❒ Remove the paper from the
output tray before it be-
comes full. If you leave pa-
per in the output tray, it
can cause a paper misfeed.
Remove Paper
Standard Tray
The standard output tray is
full. Remove paper from the out-
put tray.
Important
❒ Remove the paper from
output tray before it be-
comes full. If you leave pa-
per in the output tray, it
can cause a paper misfeed.
Replace
Maintenance Kit
It is time to replace parts in-
cluded in Maintenance Kit
Type 270. Replace Maintenance Kit Type
270. For more information
about how to replace the kit,
see the “Maintenance Kit Type
270 Replacement Guide” that
comes with the kit. After re-
placing the kit, clean the regis-
tration rollers.
⇒ P.84
“Cleaning the Registration Roll-
er”
Messages Description Comments