Lanier AP3200 - Manual (Page 115)

Job Control Menu
101
6
❖ ❖ ❖ ❖ Paper Input 3 /
3
❖ ❖ ❖ ❖ Duplex
❖ ❖ ❖ ❖ Output Tray
Menu Description
Paper Type You can select the type of the paper in tray 1, tray 2, tray 3, tray 4.
If you want to select the paper type, do not select the auto tray se-
lect setting with the printer driver. Select the tray you want to use.
• Plain Paper
• Recycled Paper
• Special Paper
Note
❒ Default: Plain Paper
❒ "Special Paper" refers to a paper type other than plain paper or
recycled paper, such as colored paper.
❒ Only the installed trays appear on the panel display.
❒ If you select "Special Paper" for all trays, the paper is fed from
the tray you selected in the "Tray Priority" menu.
Menu Description
Duplex You can select the page orientation for duplex printing. The page
orientation selected with the printer driver overrides the one se-
lected here.
• Off
• Long Edge Bind.
• Short Edge Bind.
Note
❒ Default: Off
❒ “Duplex” is available only when the optional duplex unit is in-
stalled on the printer.
Menu Description
Output Tray You can select the output tray for printing.
The tray selection selected with the printer driver overrides the
one selected here.
Standard Tray, Finisher Tray, Mailbox Tray 1, Mailbox Tray 2,
Mailbox Tray 3, Mailbox Tray 4, Auto Tray SW
Note
❒ Default: Standard Tray
❒ Only the installed trays appear on the panel display.