Lifescan SureStep Pro - Manual (Page 68)

Care and Maintenance
56
Dry the lens area gently with a clean, soft, lint-
free cloth or tissue. Remove any lint.
Slide the closed test strip holder into the unit.
Push the holder until it clicks into place.
Turn on the bedside unit. If an error appears,
check to make sure you installed the test strip
holder correctly.
If necessary, wipe the scanner with a soft cloth
moistened with water.
Perform a quality control test to verify that the
result is within the expected range.
5
6
7
8
9
BU.book Page 56 Monday, October 28, 2002 11:14 PM