Lifescan SureStep Pro - Manual (Page 75)

63
Start by selecting Lin 1.
Select the Linearity Solution
lot number from the list
displayed.
Alternatively, scan the
barcode on the linearity
solution vial.
Depending on the configuration option setting,
you may or may not be required to enter your
operator ID.
If your operator ID is required, a configuration
option may be set to remember your ID for up
to 1 hour after the bedside unit is turned off. If
your ID appears at the operator screen, press Ok
to confirm it is correct. If the ID is not correct,
simply enter your ID and it will replace the
existing ID.
4
Select Lot #
Menu Scan
Enter Lin 1
Lot #
Linearity 1
LIN4002
LIN4001
5
BU.book Page 63 Monday, October 28, 2002 11:14 PM