Lifescan SureStep Pro - Manual (Page 82)

Special Tests
70
Enter your operator ID.
Depending on the configuration option setting,
you may or may not be required to enter your
operator ID.
If your operator ID is required, a configuration
option may be set to remember your ID for up
to 1 hour after the bedside unit is turned off. If
your ID appears at the operator screen, press Ok
to confirm it is correct. If the ID is not correct,
simply enter your ID and it will replace the
existing ID.
3
BU.book Page 70 Monday, October 28, 2002 11:14 PM