Paradyne 392xPLUS - Manual (Page 26)

2-1 3920-A2-GN31-30 November 1996
Modem Installation
Overview 2-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
392xPlus Modem Package 2-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Customer-Supplied Equipment 2-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Model 3920Plus Modem Installation 2-3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting Cables to the Model 3920 Modem 2-3 . . . . . . . . . . . . . . . . . . . . . . .
DTE Connection 2-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power Supply Connection 2-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Leased-Line Connection 2-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dial Connection 2-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Leased Backup Connection 2-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dial Backup Connection 2-5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Network Management System Connection 2-6 . . . . . . . . . . . . . . . . . . . . . . . .
Removing and Replacing the Model 3920Plus Modem 2-6 . . . . . . . . . . . . . . . . .
Model 3921Plus Modem Installation 2-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Removing and Replacing the Model 3921Plus Modem 2-11 . . . . . . . . . . . . . . . . .
392xPlus Modem Power-Up 2-11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting Factory Configuration Options for 392xPlus 2-11 . . . . . . . . . . . . . . . . .
Using the Diagnostic Control Panel (DCP) 2-12 . . . . . . . . . . . . . . . . . . . . . . . .
Overview
This chapter provides a list of equipment supplied with 392xPlus modems, as well as a list of
customer supplied equipment. In addition, it describes how to install and remove the 392xPlus
modems, and how to select a factory preset configuration using the DCP.
392x Plus Modem Package
After opening the modem’s package, check for damage and verify that the following items are
present:
For the standalone models
•
Installation instructions
•
Model 3920Plus modem
•
Power supply with power cord
•
One 6-position, 4-wire modular cord
•
One 8-position, 8-wire modular cord
2