Paradyne 392xPLUS - Manual (Page 46)

DCP Operation
3-9 3920-A2-GN31-30 November 1996
F1 F2 F3 Keys
Function keys F1, F2, and F3 select the LCD choice that appears above the function key.
Refer to the Summary section in Chapter 4 for the exception.
If the displayed LCD choice spans more than one function key, then any of the function
keys select that choice.
NOTE
In the screen examples, the F1 key is highlighted where multiple
function keys select the choice.
Select Key (Model 3921Plus only)
The Select key appears on the optional SDCP of the COMSPHERE 3000 Series
Carrier. It is used to connect the SDCP to a modem in a specific slot in the carrier.
Menu Structure
The menu tree is a hierarchical structure used to display functions that configure and control local
and remote 392xPlus modems. It is accessed via the DCP and is shown in Appendix A.
Configure
Status PList
Control
Test
SubHS
Call_Setup
Tlk/Data
Security
Remote
“Status” Displays the current status of the modem along
with the data rate and the error control mode.