Paradyne 392xPLUS - Manual (Page 60)

DCP Operation
3-23 3920-A2-GN31-30 November 1996
F1
VF Counter Clear
Command Complete
F2 F3
The message Command Complete appears on the LCD’s bottom line indicating the VF Counters
are cleared.
To exit VF and remain in the Status Branch, press the key. To exit and return to the Top-Level
menu, press the key.
Identity
Identity displays the modem’s serial number, model number, firmware revision level, hardware
revision number and firmware part number. Retrieval of this information is useful if you are
purchasing additional or replacement modems and/or making firmware upgrades.
To access Identity from the Status branch, make the following selection:
F1
Status:
VF
Identity
F2 F3
Press the key until Identity appears. Select Identity.
F1
Status:Identity >
Ser#=00000000
F2 F3
The modem’s serial number appears on the LCD’s bottom line. Press the key to scroll and
view the model number, firmware revision level, hardware part number, and firmware part number.
Ser # Serial number is an 8-digit number that identifies the modem.
Mod # Model number is an alphanumeric number that identifies the modem as
either a Model 3920Plus or Model 3921Plus modem.
FRev Firmware revision level is an alphanumeric number that identifies the level
of firmware loaded in the modem.
HPt # Hardware part number is an 11-digit number that identifies the circuit card in
the modem.
FPt # Firmware part number is an 11-digit number that identifies to service
personnel the firmware release number.
Country Country code is a 7-text character that identifies the current country code.
To exit the Identity function and remain in the Status branch, press the key. To exit and return
to the Top-Level menu, press the key.