Paradyne 392xPLUS - Manual (Page 75)

COMSPHERE 392xPlus Modems
3-38 November 1996 3920-A2-GN31-30
F1
Data Stream
Port1 Disable
F2 F3
The port field (for example, Port1) displays the selected port.
The available Data Stream action (Disable or Enable) appears on the second line of the LCD
beside the port field. If the modem’s data transmitter is enabled, the word Disable appears to
indicate that you may disable the data transmitter by selecting this action.
To change the modem’s data stream, press the F2 key. When the message Command Complete
appears, press the
key to clear the message.
F1
Data Stream
Port1 Enable
F2 F3
To change the data stream for the selected port again, press the F2 key.
or
To exit this function and remain in the Control branch, press the key. To exit and return to the
Top-Level menu, press the key.
Selecting All Ports
Selecting All will enable or disable the modem’s data transmitter function on all ports.
F1
Select DS Port >
Port1 All
F2 F3
From the Select DS Port screen, press the F3 key to select All.
F1
Data Stream All
Enable Disable
F2 F3
To enable or disable the modem’s data transmitter function on all ports, press the appropriate
function key, F1 (Enable) or F3 (Disable). When the message Command Complete appears, press
the
key to clear the message.