Paradyne 392xPLUS - Manual (Page 35)

COMSPHERE 392xPlus Modems
2-10 November 1996 3920-A2-GN31-30
6. Once you have determined that the modem is installed properly and completed its
power-up self-test, rotate the circuit pack lock until it covers the faceplate latch
(Figure 2-4) and tighten the retention screw on the circuit pack lock. This prevents the
modem from accidently being removed once it is installed in a carrier.
7. Configure the modem as described in the Selecting Factory Configuration Options section
earlier in this chapter.
495-14425-02
CIRCUIT
PACK
LOCK
OPEN CLOSED
LATCH
RELEASE TAB
Figure 2-4. Circuit Pack Lock