Panasonic MINAS E-series - Manual (Page 9)

9
Before Use
[Before Use]
Do not place inflammable matter
near the motor, driver, and
regenerative resistor.
The failure could result in
fire.
Do not install the console near
sources of heat like the heater, the
resistor, or etc.
The failure could result in
fire or damages.
Ground the earth of the servo motor
and servo driver.
The failure could result
in electric shocks.
An over-current protection, earth leakage
breaker, over temperature protecter and
emergency stop device must be installed.
The failure could result in
electric shocks, injuries, or
fire.
Install an external emergency stop
device to shut down the main power
source in any emergency.
The failure could result in
electric shocks, injuries, fire,
damages or malfunction.
Wait at least the time described on the
driver after switching off the power to
allow the capacitors to discharge before
beginning to conduct the transportation,
wiring, and inspection of the driver.
The failure could result in
electric shocks.
Install the product properly to avoid
personal accidents or fire in case of
an earthquake.
The failure could result in
electric shocks, injuries, or
fire.
Attach the motor, driver,
regenerative resistor to
incombustible matter such as metal.
The failure could result in
fire.
Make sure to secure the safety after
the earthquake.
The failure could result in
electric shocks, injuries, or
fire.
Arrange the phase sequense of the
motor and wiring of the encoder.
The failure could result in
injuries, damages, or
malfunction.
DANGER
Confirm that there is no danger of an
electric shock before beginning to
conduct the transportation, wiring,
and inspection of the motor.
The failure could result in
electric shocks.
Only persons who are trained and quali-
fied to work with or on electrical equip-
ment are permitted to operate or main-
tain this equipment.
The failure could result in
electric shocks.