Configuration for isdn (h.320) calls, Advanced v.35/rs-449/rs-530 network – Polycom Webcam User Manual

Page 105

Advertising
background image

Chapter 4 - Advanced Configuration for your Network Environment

© Polycom, Inc. 2003

103

Configuration for ISDN (H.320) Calls

This section contains advanced ISDN configuration information for
the V.35/RS-449/RS-530 and BRI network interfaces. The
information displayed on the various ISDN configuration screens
varies according to the network interface that is attached to your
ViewStation EX system.

The configuration information is divided into:

Advanced V.35/RS-449/RS-530 Network Interface
Configuration

Advanced Quad BRI Network Interface Configuration

Once your ISDN configuration is complete, you may want to place
a test call. For information about placing a call, refer to

Video Calls

on page 148

.

Advanced V.35/RS-449/RS-530 Network Interface
Configuration

This section describes information and settings for the following
advanced V.35/RS-449/RS-530 configuration screensR:

Advanced V.35 (Setup).

See

Configuring the

V.35/RS-449/RS-530 Serial Interface Control Signals, on page
104

.

Broadcast Mode

. See

Setting up Satellite (H.331) Broadcast

Mode, on page 105

.

Dialing Speeds.

See

Selecting Dialing Speeds, on page 106

.

Advanced Dialing (Calling Profile, Prefix, Suffix).

See

Setting

the Calling Profile, on page 108

.

Crypto Resync Pulse

. See

Enabling Crypto Resync on page 110

.

Notes

The V.35/RS-449/RS-530 network interface supports the V.35,
RS-449, or RS-530 protocol depending on the cable you use to

Advertising