Polycom Webcam - Manual (Page 288)

ViewStation EX User Guide
286 www.polycom.com
Far End Loop
The Far End Loop screen allows you to find out whether or not your
audio and video is going out across the network and coming back
properly. This diagnostic tool is only available in an H.320 call.
To access the Far End Loop screen:
Select System Info > Diagnostics > Far End Loop.
Reset System
The Reset System screen clears existing system configurations. You
can erase your system settings, your admin password, and/or your
Address Book entries. Once you have reset the system, your system
walks you through the system configuration screens as it did when
you powered it on for the first time.
To access the Reset System screen:
Select System Info > Diagnostics > Reset System.
To reset the system:
1. Enter the system’s serial number.
2. Make sure the Delete System Settings option is selected.
3. Select the Reset button.
Note
Be sure to copy system information before resetting a system. All
settings are lost when you reset the system. Passwords are set on
your system’s user interface. If you forget the admin password, this
screen will allow you to reconfigure the system with a new
password.