Polycom Webcam User Manual
Page 192
ViewStation EX User Guide
190
www.polycom.com
5.
Highlight the entry you want to add and press the SELECT
button on the remote control. The multipoint Address Book
entry screen appears with that entry added.
6.
Repeat Steps 4 and 5 until you have entered all of the sites for
the call.
7.
If the site being added is a OneDial number (meaning that it has
both IP and ISDN numbers displayed as one entry), the user can
change the call type of the individual entry by selecting the
appropriate type in the Type field.
8.
Select a dialing speed for the call in the Speed field. All of the
sites in the call will be dialed at this speed regardless of the
dialing speeds set for the individual Address Book entries.
9.
Highlight the Save icon and press the SELECT button on the
remote control to return to the main Address Book screen.
To place a multipoint meeting call from the Address Book:
1.
Select the multipoint meeting entry you created in the Address
Book.
2.
Press the CALL•HANG-UP button. All of the sites are called
automatically.