Polycom Webcam - Manual (Page 112)

ViewStation EX User Guide
110 www.polycom.com
prefix again; simply select the preferred dialing speed and the
system enters the proper prefix.
Enabling Crypto Resync
If a cryptographic encoder/decoder is connected between the
ViewStation EX system and the network, it may require a
resynchronization signal from the ViewStation EX system. This is a
signal indicating that the ViewStation EX system has lost video
synchronization due to a network problem and requires that the
cryptographic encoder/decoder resync with the equipment at the
other end of the connection.
To access the Crypto Resync Pulse screen:
1. Select System Info > Admin Setup > Security.
2. In the Security screen, select the Crypto Resync option.The
Crypto Resync Pulse
screen appears.
Figure 4-14. Crypto Resync Pulse Screen
You can configure the following options on this screen:
❑
Crypto Resync —This option is Off by default. To enable
Crypto Resync, select On.
❑
Time Between Pulses (sec) —This option lets you set the time
between pulses (in seconds).