Adding a telephone number, Setting the administrator and meeting passwords, Figure 3-15.telephone numbers screen – Polycom Webcam User Manual
Page 80: Adding a telephone number on, Setting the administrator and
ViewStation EX User Guide
78
www.polycom.com
Adding a Telephone Number
On the Telephone Numbers screen, enter the number of the analog
telephone line that is connected to your system.
Figure 3-15.
Telephone Numbers Screen
You can enter the number of another telephone in the same room as
the ViewStation EX system. When you have finished, highlight the
Save
icon and press the SELECT button on the remote control.
Setting the Administrator and Meeting Passwords
This screen contains an initial administrator password, which is
your system’s serial number. It also has a meeting password that is
randomly generated.
The administrator password allows access to all the Admin Setup
screens using the user interface or the Web interface.
You can change, remove, or keep the initial password.
To change the administrator password:
1.
Highlight the password field using the remote control.
2.
Backspace over the initial password (the system’s serial
number) using the left arrow key on the remote control.
3.
When the field is empty, start entering your new password as
follows:
Enter numbers using the remote control’s keypad.