Polycom Webcam - Manual (Page 172)

ViewStation EX User Guide
170 www.polycom.com
To tilt or pan the camera:
Use the arrow buttons on the remote control to tilt the camera up
and down and to pan from side to side.
To zoom:
Use the ZOOM buttons on the remote control to zoom in and out.
To go to a menu screen while in a call:
While in a call, if you have to go to a menu screen to make some
adjustments, pressing the NEAR or FAR button on the remote
control returns you to your call view.
Adjusting Camera Settings
You can adjust the settings of your cameras from the Cameras
screen.
To access this screen:
Select System Info > Admin Setup > Video/Camera > Cameras.
The options available on the Cameras screen are described in the
section
Video and Cameras Screens on page 305 .
Setting Camera Presets
You can set and store up to ten preset camera positions. These ten
camera presets can be distributed across the far camera and up to
four near-site cameras.
To set a camera preset:
1. Press the NEAR or FAR button on the remote control to select
the near or far camera.