Editing an existing entry in the address book – Polycom Webcam User Manual
Page 165
Chapter 5 - Using the ViewStation EX
© Polycom, Inc. 2003
163
Tip
Enter a dot.
To enter a dot, press the right button on the remote
control.
Shift key settings.
The on-screen keyboard’s Shift key has three
settings:
- lower case: using the remote control, select the Shift key until
it turns into a greyish down arrow.
- upper case: using the remote control, select the Shift key until
it turns into a green up arrow (as shown on Figure 5-9). Only the
next letter you enter is capitalized.
- caps lock: select the Shift key twice. A lock symbol appears on
the key. All the letters are capitalized while the lock is visible.
6.
If you are using OneDial, enter both the ISDN VIdeo Number
and the IP Video Number. OneDial is a Polycom proprietary
feature that greatly simplifies videoconferencing dialing
through taking care of a number of dialing and network
processes in the background. For more information about
OneDial, refer to
.
7.
Highlight the Save icon and press the SELECT button on the
remote control. You then return to the main Address Book
screen.
Note
To create a multi-site entry, refer to
Editing an Existing Entry in the Address Book
To edit an existing Address Book entry:
1.
Use the UP and DOWN arrow buttons on the remote control to
highlight an Address Book entry.