Polycom Webcam - Manual (Page 199)

Chapter 6 - Using Advanced System Features
© Polycom, Inc. 2003 197
Switching Modes
To switch multipoint meeting modes:
1. From the main calling screen, select System Info > User Setup.
Note
If you are switching modes during a multipoint call, press the
MENU button on the remote control to go to the main calling screen.
2. Select the MP Mode field. The Multipoint Setup screen
appears.
3. Select Auto, Discussion, Presentation, or Full Screen mode.
4. Press the MENU button on the remote control until you return
to the main screen.
Multipoint Conference Password
A multipoint conference password is sometimes required for calls
dialed into your MCU or dialed out to a third-party MCU. Your
system can be configured to send or set the Meeting Password as
the multipoint conference password to the MCU.
Note
This feature is optional. In order to enable this feature and all
multipoint-related capabilities, you must upgrade your system to
support multipoint calls. For more information, refer to
Upgrading
the System for Multipoint Calls .
The Meeting Password works with the ViewStation EX system’s
embedded MCU and other external bridges that support meeting
passwords.