Controlling sound effects volume – Polycom Webcam User Manual
Page 176
ViewStation EX User Guide
174
www.polycom.com
To activate the MUTE function:
Press the MUTE button on the remote control or on the microphone
pod. Notice that the red light on top of the microphone pod is
illuminated.
The Mute icon appears in the bottom left corner of the television
monitor indicating to the near and far sites that mute is turned on.
This mute indicator feature is supported in ISDN and IP calls.
However, the mute indicator for IP calls is only supported by
Polycom endpoints.
Controlling Sound Effects Volume
There is a separate volume control for the sound effects on the
ViewStation EX system.
To adjust this volume setting:
1.
Select System Info > Admin Setup > Phone/Audio.
2.
Select the Sound Effects Volume field.
3.
Adjust the volume setting by using the volume control buttons
on the remote control.