Upgrading the system for multipoint calls, Upgrading the system for multipoint calls on – Polycom Webcam User Manual
Page 57
Chapter 2 - Installing the ViewStation EX
© Polycom, Inc. 2003
55
informed of the progress of your update. Do not turn your
system off during this process.
Note
The software update application will terminate if there are too many
errors on the communication line. The system you are updating will
revert back to the previous software version. If your software does
not update, try using a lower data rate.
4.
Once the software upgrade process completes, your system will
automatically restart and the main calling screen will appear. If
you have purchased an MP upgrade key for multipoint calls,
please refer to
Upgrading the System for Multipoint Calls on
for instructions on entering the key.
Upgrading the System for Multipoint Calls
If you have purchased an MP upgrade key from Polycom, you can
upgrade your ViewStation EX to support multipoint calls.
For more information about making multipoint calls, please refer to
To enter the MP key:
1.
From the main calling screen, go to System Info>Admin
Setup>Software/Hardware>System Options
.
2.
Enter your multipoint key.
When MP is enabled, the Multipoint field changes from
Disabled
to Enabled.
Note
Press Select on the remote to make the keyboard appear. Your
key will be 20 characters long. Enter five characters in each box.
The cursor will move automatically to the next box as you add