Polycom Webcam - Manual (Page 134)

ViewStation EX User Guide
132 www.polycom.com
Setting Global Management Preferences
Global Management must be manually set on the ViewStation EX
system to be active.
To access the Global Management setup screen:
Select System Info > Admin Setup > LAN/H.323 > Global
Management > Setup.
The Global Management setup screen
appears.
Figure 4-24. Global Management (Setup) Screen
You can set the following options on this screen:
❑
Allow Remote Monitoring —Enable this option to allow the
GMS system administrator to view a call or view the room
where the ViewStation EX camera is installed.
For privacy reasons, you can enable this option only from the
near-site system. Also, if you want to protect your office
privacy, disable this option.
❑
Time Difference from GMT —Enter the time difference from
where the system is installed and Greenwich Mean Time
(GMT). This allows the GMS to view the local time of the
managed system.
❑
Daylight Savings Time —Enable this option if the area where
the system is installed participates in Daylight Savings Time.
❑
Require Account Number to Dial —You must use GMS 2.0 or
later to use this option. This feature is used to log calls to a