Configuring streaming for apple quicktime, Viewing streaming with apple quicktime on the pc – Polycom Webcam User Manual
Page 216
ViewStation EX User Guide
214
www.polycom.com
Configuring Streaming for Apple QuickTime
Enabling and Starting Streaming on the ViewStation EX
To enable streaming on your system:
1.
Go to the Streaming screen (System Info > Admin Setup >
LAN/H.323 > Streaming
).
2.
Make sure that Enable Streaming Announcement is enabled. It
should be set by default.
3.
Enable Allow Streaming.
To start sending a stream:
1.
From the main screen, select Call Type.
2.
Select Streaming Call. Decide if you need a password.
3.
Click Start. A Streaming icon is now displayed on the upper left
corner of your television screen.
You can start streaming before or after you place a video call. If you
are streaming a presentation, you can go ahead and start the
presentation immediately.
Viewing Streaming with Apple QuickTime on the PC
To view the stream with Apple Quick Time on your PC:
1.
Make sure you have enabled and started streaming on your
ViewStation EX system as described in “Enabling and Starting
Streaming on the ViewStation EX.”
2.
To view streaming using Apple QuickTime:
a.
Open a Web browser.
b.
Enter the IP address of your ViewStation EX system in the
browser address field.