Printronix T4204 - Manual (Page 109)

IGP/PGL Submenu
109
• X2 DPD. When selected, I-2/5 bar code with a magnification X2 will use
the specially configured ratios 3:3:6:5 rather than 3:6:9:12 for
compatibility issues.
• Modulo 7 CD. The I-2/5 bar code uses a modulo 7 check digit instead of
the default modulo 10 check digit.
AI 00 Spaces
This option is designated for EAN/UCC-128 barcodes whose application
identifier (AI) is 00.
• Disable. The printable data field is printed with the AI enclosed in
parentheses. This is the standard EAN/UCC-128 format.
• Enable. The printable data field is printed with the UCC fields separated
by spaces. This option is IGP-X00 compatible.
Select SO Char.
Allows you to specify a decimal code from 0 through 255 to be used in place
of SO (Shift Out) as the control code which allows access for the alternate set
of control function characters. See the description of the Code 128 barcodes
in the
IGP/PGL Programmer’s Reference Manual for details.
Host Form Length
Determines how the physical page size is affected upon an EXECUTE
command.
• Disable. Forms printed in EXECUTE mode do not change the physical
page size. Therefore, the size of the form (defined in CREATE mode)
must fit within the current page dimensions, or errors may occur.
• Enable. The physical page length will change to match the form length
(defined in CREATE mode). The physical page size remains at the new
setting until another EXECUTE command is received, or the PRINTER
CONTROL menu settings are changed.
NOTE: Changing the form length via the EXECUTE command changes the
LP+ logical dimensions.
PGL Normal
This parameter allows you to select whether the attributes associated with
text printed in the PGL Normal mode are controlled by the PGL menu or the
LinePrinter Plus menu.
• LP+ Menu. The default. PGL Normal mode text is printed with the
attributes defined in the LinePrinter Plus menu.
• PGL Menu. PGL Normal mode text default is printed with the attributes
defined in the PGL menu.