Format control, Max. print width, Buffer print – Printronix T4204 User Manual
Page 157
Coax Emulation Menu
157
Format Control
Enables the printer to reflect the same spacing as CTPC model printers after
absolute and relative move commands are executed.
•
Disable. Reflects distance, generated by the IGP/VGL feature, IGP/PGL
feature, and Hex Transparent control code sequence, in the new position
(after horizontal and vertical tabs are executed).
•
Enable. Does not reflect distance, generated by the IGP/VGL feature,
IGP/PGL feature, and Hex Transparent control code sequence, in the
new position (after horizontal and vertical tabs are executed).
Max. Print Width
Set the maximum print width the printer will print when using a C/T host
interface.
•
13.2 inches
•
Printer Width (the width of the T4204, or 4.10 inches)
Buffer Print
•
Disable. The printer will print normally.
•
Enable. The printer prints the EBCDIC data and control codes received
from the host as hex values.
NOTE: Use of this parameter may alter print attributes set by the host
computer. A power cycle may be required after changing Buffer Print
from enable to disable.