Printronix T4204 - Manual (Page 154)

154
Chapter 3 Coax/Twinax Emulation
Image Buf Size
Allows you to select 4K or 2K as the image buffer size. This option is only
valid when printer emulates 3287. For the 4234 emulation, the buffer size is
fixed at 4K. A POR status is sent to the host when the printer is put online.
Intervention Req
• Send to Host. The printer sends a signal to the host computer when a
printer fault or hold mode time-out occurs.
• Do Not Send. No signal will be sent to the host computer.
Compatibility Options
The Compatibility Options allow you to select special printer functions in the
non-SCS mode, based on the capabilities of the printer emulated.
CR at MPP+1
MPP is Maximum Print Position, which is also known as line length. This
option controls a carriage return at the end of a print line and at MPP+1.
• On. Produces a carriage return to the first print position of the next line.
• Off. Produces a carriage return to the first print position of the current line.
NL at MPP+1
Controls how many lines are skipped when the carriage returns to a new line.
• On. Moves to the first print position two lines down from the current
position.
• Off. Moves to the first print position of the next print line.
Compatibility
Options
(from page 150)
CR at MPP+1 NL at MPP+1 Position Aft FF
(4234 only)
Last Char=FF Null
Suppression
FF Validity
Auto Skip at
End
FF After Job CR, EM & NL
(3287 only)
On*
Off On*
Off Off*
On On*
Off Off*
On Off*
On
Off*
On Off*
On On*
Off