Printronix T4204 - Manual (Page 17)

17
Hardware Options
Ask your Printronix representative about the following options, which can
enhance the versatility of your printer.
• Fonts
A selection of fonts is available to extend the capabilities of the
standard resident fonts.
• Media Cutter
The cutter is used to automatically cut printed media when the media
exits the printer.
• Label/Tag Catcher Tray
Used with the Media Cutter option to catch the cut media and collect it
away from the Media Cutter Assembly.
• Twinax/Coax Host Interface
Provides connection to an IBM host computer system using a coax or
twinax interface.
• PrintNet
®
Servers
Allows the user to attach the T4204 to a LAN (Local Area Network)
rather than attaching it directly to a host system. PrintNet servers
support Ethernet only.
PrintNet servers are available as an internally installed factory option,
mounted inside the printer with the 10Base-T (UTP) connection only.
PrintNet servers are also available as an externally mounted factory
or field option with either a 10Base-T (UTP) or 10/100 BaseT
connection. The external PrintNet field option is user installable and
connects to the Centronics parallel port at the back of the T4204
printer.
NOTE: When the Twinax/Coax Interface option is installed and a PrintNet
option is also required, an External PrintNet option must be used. The
Internal PrintNet option is not supported with the Twinax/Coax
Interface option installed.
Labels can be designed and printed using the following:
• Printronix LP+
• Printronix IGP/PGL or IGP/VGL graphics languages